Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Aaron-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] You can see where the buttons came. To remove the buttons from the holder all you need to do is push evenly on two buttons at a time, this will make them pop out easily. Once you have removed the buttons you can now wash or replace the buttons with new buttons.
[* black] To replace the new buttons push them back the way they were and you should feel them click into place.
[* black] Then put the back and front back together with the computer part in the middle. Screw them together. Then put the faceplate on. You will hear it click into place. Finally put the protective cover back on by pushing directly down into the top of the device.