Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #6

Modifica in base a Ron Davis-

Modifica approvata da Ron Davis

Prima di
Dopo il
Invariato

Righe Passo

[* icon_note] The CSIC assy isassembly sits inside the cartridge unit (yellow box)unit.
[* green] There arered] Reaching from the back of the cartridge unit, disengage the two tabs holdingthat hold the CSIC assyassembly in place, both located on the back of itplace.
[* icon_cautionicon_note] The tabs can be difficult to disengage. Refer toThe second picture to see what it looks likeimage shows the rear of CSIC assembly.
[* greenicon_note] The third pictureimage shows where the tabs lock onto the carriage unit.
[* black] Remove the CSIC assembly from the cartridge
unit.
[* icon_note] The CSIC assy isassembly sits inside the cartridge unit (yellow box)unit.
[* green] There arered] Reaching from the back of the cartridge unit, disengage the two tabs holdingthat hold the CSIC assyassembly in place, both located on the back of itplace.
[* icon_cautionicon_note] The tabs can be difficult to disengage. Refer toThe second picture to see what it looks likeimage shows the rear of CSIC assembly.
[* greenicon_note] The third pictureimage shows where the tabs lock onto the carriage unit.
[* black] Remove the CSIC assembly from the cartridge
unit.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione