Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #6

Modifica in base a Larry Huang-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] *Usingicon_note] The CSIC Assy is inside the special tool, disengage tab A ofCartridge Unit.
[* green] There are two tabs holding
the CSIC Assy onin place, both located in the right rear sideback of the Carriage Unitit.
[* blackicon_caution] The tabs can be difficult to disengage. Refer to second picture to see what it looks like.
[* green
] *Using the special tool, disengage tab B of the two tabs behind CSIC Assy on the right rear side of the Carriage UnitAssy.
[* black] *Lift up theLift CSIC Assy upwards to remove it from the Carriage Unit to disconnect the CSIC FFC, and remove the CSIC Assy.
[* black] New line
Unit.
[* black] *Usingicon_note] The CSIC Assy is inside the special tool, disengage tab A ofCartridge Unit.
[* green] There are two tabs holding
the CSIC Assy onin place, both located in the right rear sideback of the Carriage Unitit.
[* blackicon_caution] The tabs can be difficult to disengage. Refer to second picture to see what it looks like.
[* green
] *Using the special tool, disengage tab B of the two tabs behind CSIC Assy on the right rear side of the Carriage UnitAssy.
[* black] *Lift up theLift CSIC Assy upwards to remove it from the Carriage Unit to disconnect the CSIC FFC, and remove the CSIC Assy.
[* black] New line
Unit.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto