Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #4

Modifica in base a Larry Huang-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] *Disengageyellow] Disengage the two tabs of the Head FFC Cover, and while disengaging the dowelmiddle tab with a flathead screw driver, slide it upward,driver.
[* black] Slide the cover upward
and rotate it around the Hingehinge by 90°.
[* black] *Using the special tool, disengage tab A of the CSIC Assy on the right rear side of the Carriage Unit.
[* black] *Using the special tool, disengage tab B of the CSIC Assy on the right rear side of the Carriage Unit.
[* black] *Disengageyellow] Disengage the two tabs of the Head FFC Cover, and while disengaging the dowelmiddle tab with a flathead screw driver, slide it upward,driver.
[* black] Slide the cover upward
and rotate it around the Hingehinge by 90°.
[* black] *Using the special tool, disengage tab A of the CSIC Assy on the right rear side of the Carriage Unit.
[* black] *Using the special tool, disengage tab B of the CSIC Assy on the right rear side of the Carriage Unit.