Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche a questo Step

Modifica in base a Larry Huang-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] *Pullicon_caution] The CR Scale is a clear plastic strip that goes across the printer. Be careful to not break it by stretching it too much.
[* green] Pull
the right end of the CR Scale into the direction of the arrow,right and remove the CR Scale from the tab on the Right CR Shaft Mounting Plateright tab.
[* black] *Draw outOn the right end ofleft side, remove the spring coil connected to the CR Scale towardwith tweezers.
[* blue] Bring
the left directioncoil section to an upright position with the tweezers.
[* violet] Push downwards to release foot 1
from the rearcutout on mounting plate.
[* black] Turn the coil section counterclockwise to release it from the mounting plate.
[* black] Remove spring coil from the hole on the CR Scale.
[* black] Turn the CR Scale 90 degrees to take it out
of the Carriage Unittab.
[* black] *Pullicon_caution] The CR Scale is a clear plastic strip that goes across the printer. Be careful to not break it by stretching it too much.
[* green] Pull
the right end of the CR Scale into the direction of the arrow,right and remove the CR Scale from the tab on the Right CR Shaft Mounting Plateright tab.
[* black] *Draw outOn the right end ofleft side, remove the spring coil connected to the CR Scale towardwith tweezers.
[* blue] Bring
the left directioncoil section to an upright position with the tweezers.
[* violet] Push downwards to release foot 1
from the rearcutout on mounting plate.
[* black] Turn the coil section counterclockwise to release it from the mounting plate.
[* black] Remove spring coil from the hole on the CR Scale.
[* black] Turn the CR Scale 90 degrees to take it out
of the Carriage Unittab.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto