Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #10

Modifica in base a Xin Chen-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] *RemoveRemove the three C.B.P. 2.6x83 screws that secure the Printhead using Phillips Screw Driver, No.1, and removeDriver No.1.
[* black] Remove
the Printhead by lifting it up vertically.
[* black] *DisconnectRemove the Printhead by disconnecting the two Head FFCs on the back side, and remove the Printheadside.
[* black] *RemoveRemove the three C.B.P. 2.6x83 screws that secure the Printhead using Phillips Screw Driver, No.1, and removeDriver No.1.
[* black] Remove
the Printhead by lifting it up vertically.
[* black] *DisconnectRemove the Printhead by disconnecting the two Head FFCs on the back side, and remove the Printheadside.