Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #3

Modifica in base a Xin Chen-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] *Open the Cartridge Cover and remove all Ink Cartridges.
[* black] *Disengage the two tabs of the Head FFC Cover, and while disengaging the dowel with a flathead screw driver, slide it upward, and rotate it around the Hinge by 90°.
[* black] *Using the special tool, disengage tab A of the CSIC Assy on the right rear side of the Carriage Unit.
[* black] *Using the special tool, disengage tab B of the CSIC Assy on the right rear side of the Carriage Unit.
[* black] *Lift up the CSIC Assy from the Carriage Unit to disconnect the CSIC FFC, and remove the CSIC Assy.