Salta al contenuto principale

Modifiche al passo #1

Modifica in base a mmonagan-

Modifica approvata da Andrew Optimus Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Disconnect the right fan cable from the logic board by placing a spudger beneath the cable and lifting up.
[* black] Remove the three silver T6 Torx screws securing the right fan
Be sure to the logic board and lower case.
[* black] Lift
lift up on the right fan up and carefully peel up the tape securing the fan to the heat sinkside as you goshown.
[* black] Disconnect the right fan cable from the logic board by placing a spudger beneath the cable and lifting up.
[* black] Remove the three silver T6 Torx screws securing the right fan
Be sure to the logic board and lower case.
[* black] Lift
lift up on the right fan up and carefully peel up the tape securing the fan to the heat sinkside as you goshown.

Immagine 2

Eliminato

Immagine 3

Eliminato