Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Kyle Wiens-

In attesa di approvazione

Prima di
Dopo il

Righe Passo

+[* black] We're going to:
+ [* black] Swap out a the existing hard drive for a 500 GB drive.
+ [* black] Then remove the optical drive and install another new 500 GB drive in its place.
[* black] Carefully insert a putty knife into the crevice between the top cover and bottom housing. Start on the left side first.
[* black] Gently enlarge the existing crevice by twisting the putty knife downward and away from the mini.
[* black] Repeat the prying motion until a portion of the bottom housing has been nudged upward.