Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Phillip Takahashi-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Locate the 10 mm hex coolant drain plug. It is on the right engine cover, just below the coolant outlet.
[* black] Turn the coolant drain plug counter-clockwise with a 10 mm socket wrench or box end wrench until it can be turned freely by hand.
[* black] Place a container under the drain plugplug to catch the coolant when it streams out of the coolant drain hole.
[* black] Place a container under the drain plugplug to catch the coolant when it streams out of the coolant drain hole.
[* icon_note] If you are not using a pan style container, it is recommended that you use a funnel to help prevent spills.