Salta al contenuto principale

Modifiche al passo #1

Modifica in base a adammw-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Turn off the power and remove the battery before working on your Eee PC
[* black] Start by removing the keyboard
[* red] There are four latches on the top of the keyboard, use a paper clip or other object to disengage the latches
[* black] You may have to pull the keyboard up enough with the object - there is no spring mechanism to pop the keyboard out. One trick is after lifting it enough, to slide it (not too much) upward to remove the bottom side.
[* black] The keyboard assembly has also two plastic retention points on the sides, and some thermal tape sticking the keyboard down.
[* icon_caution] Caution: the keyboard has a ribbon connector underneath it which must be carefully unplugged before fully removing the keyboard.

Immagine 1

Nessuna immagine precedente.

Aggiunto