Modifiche al passo #13
Modifica di Philip Le Riche —
Modifica approvata da Philip Le Riche
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* yellow] Disengage two connectors on a small circuit board on the bottom of the 2nd hard disk bay and lift the screened cable off the bay. |
|---|---|
| + | [* green] Remove 2 6.5mm black screws. (On reassembly it's important to put these screws back in the right holes otherwise the front cover of the laptop won't fit. |
| + | [* black] Gently lift the motherboard from the right hand edge and disengage its connectors from their openings in the side of the laptop lower shell. You can now remove it completely. |
Immagine 1
Nessuna immagine precedente.
Aggiunto