Salta al contenuto principale

Modifiche al passo #13

Modifica in base a Miroslav Djuric-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] There's tons of chips on the front of the board. Other chips of interest include:
[* red] Texas Instruments WL1285C chip that supports WiFi (802.11 a/b/g/n), Bluetooth 3.0, FM and GPS technologies (thanks [http://www.chipworks.com|Chipworks]!)
[* orange] [http://www.kionix.com/Product%20Sheets/KXTF9%20Product%20Brief.pdf|Kionix KXTF9] accelerometer
[* yellow] ST Micro AGD8 2040 S6NBF gyroscope
[* green] [http://www.avagotech.com/docs/AV02-2665EN|Avago ACPM-7868] quad-band power amplifier
[*
black] What's this? Did we use Content Aware to remove all of the chips from the back of the motherboard?
[* black]
The answer is no; there just isn't much going on with the backside of the board.
[* black]
We find a:
[* red] Microphone
[* orange] Proximity Sensor
[* yellow] Ambient Light Sensor
[* green] S260 1563 (microphone controller?)
a microphone (red), proximity sensor (orange), ambient light sensor (yellow) on the back.
[* black] There's tons of chips on the front of the board. Other chips of interest include:
[* red] Texas Instruments WL1285C chip that supports WiFi (802.11 a/b/g/n), Bluetooth 3.0, FM and GPS technologies (thanks [http://www.chipworks.com|Chipworks]!)
[* orange] [http://www.kionix.com/Product%20Sheets/KXTF9%20Product%20Brief.pdf|Kionix KXTF9] accelerometer
[* yellow] ST Micro AGD8 2040 S6NBF gyroscope
[* green] [http://www.avagotech.com/docs/AV02-2665EN|Avago ACPM-7868] quad-band power amplifier
[*
black] What's this? Did we use Content Aware to remove all of the chips from the back of the motherboard?
[* black]
The answer is no; there just isn't much going on with the backside of the board.
[* black]
We find a:
[* red] Microphone
[* orange] Proximity Sensor
[* yellow] Ambient Light Sensor
[* green] S260 1563 (microphone controller?)
a microphone (red), proximity sensor (orange), ambient light sensor (yellow) on the back.
[* icon_note] It is possible that Motorola placed all of the chips on one side of the board to keep the thickness of the device to a minimum.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Nessuna immagine precedente.

Aggiunto