Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #17

Modifica in base a Evan Noronha-

Modifica approvata da Evan Noronha

Prima di
Dopo il

Righe Passo

[* icon_note] Once you've confirmed the iMac powers on and functions properly, you can start pulling the tabs on the adhesive strips to seal the iMac.
[* black] Begin with strips 4L and 4R, by reaching in from above and pulling the tabs straight up from the bottom edge of the display.
[* black] Once the film on the bottom two strips have been removed, rest the display against the rear enclosure. Firmly pull the remaining adhesive film tabs straight outward away from the rear enclosure to seal the iMac.