Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #11

Modifica in base a Evan Noronha-

Modifica approvata da Evan Noronha

Prima di
Dopo il
Invariato

Righe Passo

[* black] With allRepeat the previous step for the 4L adhesive strips applied, gently lower the display into place so that the bottom edge is resting in its housing and you can access the internal components from the topstrip.
[* black] EnsureOnce you've applied all the display is sitting flush from both edges ofadhesive strips the iMac.
[* black] Apply a piece of masking tape across the lower edge of the display to act
iMac should look as a hinge and temporarily secureshown in the displayphoto.
[* black] With allRepeat the previous step for the 4L adhesive strips applied, gently lower the display into place so that the bottom edge is resting in its housing and you can access the internal components from the topstrip.
[* black] EnsureOnce you've applied all the display is sitting flush from both edges ofadhesive strips the iMac.
[* black] Apply a piece of masking tape across the lower edge of the display to act
iMac should look as a hinge and temporarily secureshown in the displayphoto.

Immagine 1

Nessuna immagine precedente.

Aggiunto