Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #12

Modifica in base a iRobot-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Place the oil filler cap back into the oil filler hole and twist it clockwise until it is snug,
[* red] Locate, remove and wipe off the oil dipstick at the front of the engine. The dipstick has a yellow handle.
[* black] Place the oil dipstick back into its hole all the way and remove it again. Note the oil level on the dipstick;dipstick, it should be between the two bumps. If the oil is below the bottom bump you will need to add oil and if it is above the top bump you will need to remove oil.
[* black] Place the oil dipstick back into its hole all the way and remove it again. Note the oil level on the dipstick;dipstick, it should be between the two bumps. If the oil is below the bottom bump you will need to add oil and if it is above the top bump you will need to remove oil.
[* black] Adjust oil level as necessary and put the dipstick back when you are done.