Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #9

Modifica in base a Phillip Takahashi-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Wipe up the old oil on the engine's oil filter threads, filter seal face and any parts that were dripped on.
[* black] Use a clean finger to apply a thin layer of new oil onto the gasket of the new oil filter.
[* black] Place the filter on the engine's oil filter threads and turn it clockwise by hand until it is snug.
[* blackicon_caution] Do not over-tighten or you may strip the oil filter threads.
[* blackicon_caution] Do not over-tighten or you may strip the oil filter threads.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto