Salta al contenuto principale

Modifiche al passo #6

Modifica di Brett Hartt

Modifica approvata da Brett Hartt

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Using a 3/8 wrench in your left hand, open the bleed valve on the front brake cylinder.
- [* black] The built up pressure in the lines will force some of the brake fluid out of the lines.
+[* black] Using a 3/8" wrench with your left hand, open the bleed valve on the front brake cylinder.
+ [* black] The built-up pressure in the lines will force some of the brake fluid out of the lines.
[* black] Continue to force more brake fluid out of the brake lines by depressing the front brake lever with your right hand.
[* icon_caution] While bleeding the brakes, focus on the bleeder hose. If you see an air bubble traveling up the bleed hose, close the bleed valve immediately, and begin the process again.
[* black] Once the brake lever is completely depressed, quickly close the bleed valve, making sure that no air bubbles enter into the brake lines.