Salta al contenuto principale

Modifiche al passo #3

Modifica di Brett Hartt

Modifica approvata da Brett Hartt

Prima di
Dopo il
Invariato

Righe Passo

[* black] Locate the brake fluid bleed valve on the top of the front brake assembly, and flip up the rubber cap covering it.
-[* black] Slide a ***10mm*** brake bleeder hose over the bleed valve.
+[* black] Slide a 3/8" brake bleeder hose over the bleed valve.
[* icon_note] If you are using a stop valve for bleeding the brake lines, make sure that the arrow on the valve is pointing ''away'' from the brake assembly (along the direction of flow).