Salta al contenuto principale

Modifiche al passo #1

Modifica in base a steve-

Modifica approvata da Jake Devincenzi

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Use the flat end of a spudger to free the adhesive loop securing to the I/O board power cable to the upper case.
+[* black] Use the flat end of a spudger to free the adhesive loop securing the I/O board power cable to the upper case.
[* black] Disconnect the I/O board by pulling the power cable away from its socket on the logic board.
[* icon_note] Pull the cable parallel to the face of the logic board toward the front edge of the Air.