Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Jasper Fleischhauer-

Modifica approvata da Jasper Fleischhauer

Prima di
Dopo il
Invariato

Righe Passo

[* blackicon_caution] Before disconnecting the thermal sensor cable, take note of its orientation. It is extremely important to reinstall the connector in the current orientation so the fans will not run at full speed. If you have multiple pins on your replacement hard drive, put the connector closest to the SATA connections and closest to the PCB board.
[* blackicon_caution] Before disconnecting the thermal sensor cable, take note of its orientation. It is extremely important to reinstall the connector in the current orientation so the fans will not run at full speed. If you have multiple pins on your replacement hard drive, put the connector closest to the SATA connections and closest to the PCB board.
[* black] Scollegare il cavo del sensore termico del disco rigido da quest'ultimo.