Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Brett Hartt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Rotate the computer 90 degrees clockwise so the ports face you.
[* red] Remove the three 3 mm Phillips screws along the edge of the lower case.
[* icon_noteblack] When replacing these screws, you must install them in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer. Also, be careful not to put the screws in the two holes (ie, on either side of the video out port)port.
[* icon_noteblack] When replacing these screws, you must install them in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer. Also, be careful not to put the screws in the two holes (ie, on either side of the video out port)port.