Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Rotate the computer 90 degrees clockwise so the power receptacle faces you.
[* red] Remove the three 3 mm Phillips screws along the edge of the lower case.
[* icon_note] When replacing these screws, you must install each screwthem in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer.
[* icon_note] When replacing these screws, you must install each screwthem in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer.

Immagine 1

Vecchia Versione

Nuova Versione