Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Jeff Suovanen-

Modifica approvata da Jeff Suovanen

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Next out: the midframe that housed the motherboard, accompanied by themotherboard. Clinging to its side we find a small ribbon cable andthat plays host to the attached headset button.
[* black] A closer look at the midframe reveals a slot for the little black nub on the rearback of the left display panel.
[* icon_note] This slot allows the nub to peek through and slide along that white Teflon strip. Thisstrip, activating what ''looks'' like a linear [https://en.wikipedia.org/wiki/Potentiometer|potentiometer], whichhttps://en.wikipedia.org/wiki/Potentiometer|potentiometer]—which could be used to track IPD position as you adjust the displays.
[* black] Next out: the midframe that housed the motherboard, accompanied by themotherboard. Clinging to its side we find a small ribbon cable andthat plays host to the attached headset button.
[* black] A closer look at the midframe reveals a slot for the little black nub on the rearback of the left display panel.
[* icon_note] This slot allows the nub to peek through and slide along that white Teflon strip. Thisstrip, activating what ''looks'' like a linear [https://en.wikipedia.org/wiki/Potentiometer|potentiometer], whichhttps://en.wikipedia.org/wiki/Potentiometer|potentiometer]—which could be used to track IPD position as you adjust the displays.
[* black] Ready to go deeper, we remove a smaller midframe and peel away the rubber light-gasket from around the lenses.