Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Ron Davis-

Modifica approvata da Ron Davis

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Next out: the midframe that housed the motherboard, accompanied by the small ribbon cable and the attached headset button.
[* black] A closer look at the midframe reveals a slot for the little black nub on the rear of the display panel.
[* icon_note] This slot allows the nub to peek through and slide along that white Teflon strip. This ''looks'' like a linear potentiometer[https://en.wikipedia.org/wiki/Potentiometer|potentiometer], which could be used to track IPD position as you adjust the displays.
[* icon_note] This slot allows the nub to peek through and slide along that white Teflon strip. This ''looks'' like a linear potentiometer[https://en.wikipedia.org/wiki/Potentiometer|potentiometer], which could be used to track IPD position as you adjust the displays.
[* black] We remove a smaller midframe and quickly peel away the rubber light-gasket from around the lenses.