Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Jeff Suovanen-

Modifica approvata da Jeff Suovanen

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] We're almost done!Removing the midframe that housed the motherboard, plus a little ribbon cable on the side that includes the headset button. Also, there's a slot for the little black nub on the back of the display panel to peek through and slide along that white teflon strip. And directly above that... something. Maybe a sensor to detect IPD position?
[* black] oooh look at that uber simple adjustment rodSecond and third shots here will probably be replaced with SSP150 and SSP151, which show the complete mechanism from the other side
[* black] We're almost done!Removing the midframe that housed the motherboard, plus a little ribbon cable on the side that includes the headset button. Also, there's a slot for the little black nub on the back of the display panel to peek through and slide along that white teflon strip. And directly above that... something. Maybe a sensor to detect IPD position?
[* black] oooh look at that uber simple adjustment rodSecond and third shots here will probably be replaced with SSP150 and SSP151, which show the complete mechanism from the other side