Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Evan Noronha-

Modifica approvata da Evan Noronha

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Removing the midframe that housed the motherboard, plus a little ribbon cable on the side that includes the headset button.
[* black] Also, there's a slot for the little black nub on the back of the display panel to peek through and slide along that white teflon strip. Looks like a linear potentiometer, which would be used to track IPD position as you adjust the displays.
[* black] Second and third shots here will probably be replaced with SSP150 and SSP151, which show the complete mechanism from the other side

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione