Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Patrick Demorest-

Modifica approvata da Patrick Demorest

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackred] After all the capacitors are safely discharged, flip the housing over and remove the three indicated screws from the back.
[* blackorange] Flip it onto its side and remove the two screws attaching the powerboard to the power port.
[* blackblue] Remove the four screws from the powerboard itself. This frees the powerboard from the housing. The powerboard is the larger of the two boards.
[* blackred] After all the capacitors are safely discharged, flip the housing over and remove the three indicated screws from the back.
[* blackorange] Flip it onto its side and remove the two screws attaching the powerboard to the power port.
[* blackblue] Remove the four screws from the powerboard itself. This frees the powerboard from the housing. The powerboard is the larger of the two boards.

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione