Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Patrick Demorest-

Modifica approvata da Patrick Demorest

Eliminato
Aggiunto
Invariato

Righe Passo

[* redyellow] Remove the 4 screws on the sides (two on each side) to detach the electronics housing from the screen.
[* icon_caution] CAUTION! We are now to the point where the capacitors are accesible. Do not touch the circuit boards in the housing, be carefulboards!
[* blackgreen] Carefully lifting the housing off the screen, find and unlock the ribbon wire, before removing it by pulling parallel to the screen's surfacethen unplug it.
[* redyellow] Remove the 4 screws on the sides (two on each side) to detach the electronics housing from the screen.
[* icon_caution] CAUTION! We are now to the point where the capacitors are accesible. Do not touch the circuit boards in the housing, be carefulboards!
[* blackgreen] Carefully lifting the housing off the screen, find and unlock the ribbon wire, before removing it by pulling parallel to the screen's surfacethen unplug it.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione