Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Patrick Demorest-

Modifica approvata da Patrick Demorest

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Flip the monitor around now and locate the two slots on the edges. These slots would be below the screen where the faceplate is attached.
[* black] Use a flat tool (such as a flathead screwdriver) to pop the front frame off. It is attached via plastic snaplocks and will come off with some prying.
[* black] Once the faceplate is removed, the monitor can then be removed from the housing, leaving just the monitor and the faceplate attached with a ribbon wire. The wire can now be pulled from the slot, fully removing the faceplate from the monitor.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto