Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Eric Essen-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Always inspect your new spark plugs before installing. Check the gap on your replacement spark plugs with a feeler gauge. It should be set to .040 inches. Make sure that the crush washer and screw on plug nut are installed.
[* black] When installing spark plugs, proper torque can be important. To loose and they could rattle out or leak, to tight and you can strip your cylinder head. The correct torque for this plug is between 90 and 120 inch lbs.