Salta al contenuto principale

Modifiche al passo #35

Modifica in base a Jake Devincenzi-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use a plastic spudger to pry the metal rings on the battery connectors up so that they are vertical.
[* icon_note] These should be on the same end as the leads sticking out the sides of the circuit board. If they are on the opposite end, you put the board is on backwards. Unscrew the nuts and flip the board around.
[* icon_note] These should be on the same end as the leads sticking out the sides of the circuit board. If they are on the opposite end, you put the board is on backwards. Unscrew the nuts and flip the board around.