Salta al contenuto principale

Modifiche al passo #20

Modifica in base a Jake Devincenzi-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] The next components to install are the LEDs. Light emitting diodes are used in all sorts of electronics to provide bright, different colored lights.
[* icon_note] Note that the two leads are different lengths. Since an LED is a diode, it only allows current to travel in one direction, so it is important to install the correct lead in the correct hole.
[* red] The four LEDs belong in each of the four terminals marked LD1'''LD1''' through LD4'''LD4'''.
[* red] The four LEDs belong in each of the four terminals marked LD1'''LD1''' through LD4'''LD4'''.
[* black] When installing the LEDs, insert the shorter of the two leads into the hole next to the flat part of the printed circle.