Salta al contenuto principale

Modifiche al passo #19

Modifica in base a Jake Devincenzi-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert wisdom hereCapacitor time! This yellow component is called a capacitor. Its job is to store electrical charge, blocking direct current and allowing alternating current to pass. Capacitors are measured (in Farads) as the ratio of the electrical charge on each conductor to the potential difference between them. This capacitor is a 1 µF capacitor.
[* red] Locate the two holes labeled C1.
[* black] Install the capacitor in the same way with the printed 105 facing away from the IC socket so that you can still read it
.
[* black] Insert wisdom hereCapacitor time! This yellow component is called a capacitor. Its job is to store electrical charge, blocking direct current and allowing alternating current to pass. Capacitors are measured (in Farads) as the ratio of the electrical charge on each conductor to the potential difference between them. This capacitor is a 1 µF capacitor.
[* red] Locate the two holes labeled C1.
[* black] Install the capacitor in the same way with the printed 105 facing away from the IC socket so that you can still read it
.

Immagine 2

Vecchia Versione

Nuova Versione