Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #12

Modifica in base a David Hodson-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Locate your single yellow/violet/black/gold 47 ohmyellow/violet/black resistor.
[* icon_note] Try figuring out the nominal resistance value yourself before we tell you that it's 47 Ohms.

[* red] Like you did withInstall this resistor into the first six resistors, bend the leads and place them through the holes around the rectangleterminal marked R7.
[* black] Solder
R7 on the jointscircuit board.
[* black] Locate your single yellow/violet/black/gold 47 ohmyellow/violet/black resistor.
[* icon_note] Try figuring out the nominal resistance value yourself before we tell you that it's 47 Ohms.

[* red] Like you did withInstall this resistor into the first six resistors, bend the leads and place them through the holes around the rectangleterminal marked R7.
[* black] Solder
R7 on the jointscircuit board.