Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #8

Modifica in base a Kyle Wiens-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] To remove the hard drive, unscrew the two small Phillips screws holding the black plastic hard drive bracket to the chassis. Pull up on the white plastic tab and lift the hard drive out of the case, being careful not to strain the SATA cable.
[* black] Carefully disconnectdisconnecting the Serial ATA cable.
[* black] Carefully disconnectdisconnecting the Serial ATA cable.