Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #5

Modifica in base a Nick-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] The lower case. Apple's using wide, thin black rubber feet on the Unibody Pros, a departure from the small stubby bumpers on the Aluminum revisions.revisions.Just keep in mind it is held on with 3M double sided tape which is strong, but if you are not careful, they can come off
[* black] The lower case. Apple's using wide, thin black rubber feet on the Unibody Pros, a departure from the small stubby bumpers on the Aluminum revisions.revisions.Just keep in mind it is held on with 3M double sided tape which is strong, but if you are not careful, they can come off
[* black] There are ten Phillips screws around the perimeter of the lower case to remove:
[* red] Seven 3 mm screws
[* orange] Three 14 mm screws
[* icon_note] Apple's user manual for this computer has instructions to remove the lower case. But they got the length of one of the screws wrong. We promise to get them right in our repair guide.
[* black] The computer's serial number is engraved in the aluminum lower case, not the upper case like the other Unibody machines.