Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
-[* black] Run a plastic opening tool underneath the headphone jack and front-facing camera cable to loosen the adhesive attaching the cable to the rear panel.
+[* black] Run a plastic opening tool underneath the headphone jack and front-facing camera cable to free it from the adhesive attaching the cable to the rear panel.
[* black] Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board.

Immagine 3

Nessuna immagine precedente.

Aggiunto