Modifiche al passo #1
Modifica di Riordan McCole —
Modifica approvata da Riordan McCole
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] To disconnect the ribbon cable, use the tip of a |
|---|---|
| + | [* red] To disconnect the ribbon cable, use the tip of a plastic opening tool or your fingernail to flip up the small retaining flap. Then, you can safely pull the ribbon cable out. |
| [* black] Be sure you are prying up on the black hinged retaining flap, not the connector itself. | |
| [* black] Carefully push the lens towards you until it is almost removed from the chamber. | |
| [* black] Remove the lens assembly from the camera. |