Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Dylan Goben-

Modifica rifiutata da Kristen Gismondi

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Take the circuit board out of the plastic casing.
-[* black] Use the soldering device to iron the silver box (press-to-speak button), and then remove it from the circuit board.
-[* black] Replace the button with a new one.
-[* black] Reassemble the Walkie-Talkie by screwing in all seven screws in their correct holes and putting the two sides back together.
+[* black] Next, take the circuit board out of the plastic casing.
+[* red] Then, use the soldering device to iron the silver box, and remove it from the circuit board.
+[* black] Replace the button with the new one.
+[* black] Now, reassemble the Walkie-Talkie by screwing in all seven screws in their correct holes and putting the two sides back together.