Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Erik Eriksson-

Modifica approvata da Erik Eriksson

Prima di
Dopo il
Invariato

Righe Passo

[* black] Once you have unscrewed all four corners, open the device so it will be in two parts.
-[* black] As you're opening the inside of the Walkie-Talkie, don't break off any wires within the device.
-[* black] Taking the Phillips head screwdriver again, unscrew the three screws on the circuit board (green plate).
-[* black] Separate these screws from the other four since they are different sizes.
+[* icon_caution] As you're opening the inside of the Walkie-Talkie, don't break off any wires within the device.
+[* red] Taking the Phillips head screwdriver again, unscrew the three screws on the circuit board (green plate).
+ [* icon_note] Separate these screws from the other four since they are different sizes.