Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Dylan Goben-

Modifica rifiutata da Kristen Gismondi

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Once you have unscrewed all four corners, open the device so it will be in two parts.
-[* black] As you're opening the inside of the Walkie-Talkie, don't break off any wires within the device.
-[* black] Taking the Phillips head screwdriver again, unscrew the three screws on the circuit board (green plate).
-[* black] Separate these screws from the other four since they are different sizes.
+[* black] After you have unscrewed all four corners, open the device so it will be in two parts.
+[* icon_caution] As you're opening the inside of the Walkie-Talkie, be careful not to break off any wires within the device.
+[* red] Now, taking the Phillips head screwdriver again, unscrew the three screws on the circuit board (green plate).
+[* icon_note] Make sure to separate these screws from the other four, since they are different sizes.