Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Payton Butler-

Modifica approvata da Payton Butler

Prima di
Dopo il
Invariato

Righe Passo

-[* black] separate the two pieces of the device. Then, unscrew the shown screws.
+[* black] Once you have unscrewed all four corners, open the device so it will be in two parts.
+[* black] As you're opening the inside of the Walkie-Talkie, don't break off any wires within the device.
+[* black] Taking the Phillips head screwdriver again, unscrew the three screws on the circuit board (green plate).
+[* black] Separate these screws from the other four since they are different sizes.