Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Luis Castro-

Modifica approvata da Luis Castro

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Using a PH000 screwdriver, remove the seven screws circled in the diagram. The screw sizes are 2.25mm L and 2.40 diameter
+[* red] Using a PH000 screwdriver, remove the seven screws circled in the diagram. The screw sizes are 2.25mm L and 2.40 diameter
[* black] Once all of the screws are removed, proceed to using a plastic spudger to pry the metal cover off.
[* black] There are two clips near the bottom, right above that battery, so start by prying on the bottom edge of the plate.