Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Sarah Westberg-

Modifica approvata da Sarah Westberg

Prima di
Dopo il
Invariato

Righe Passo

[* black] Using a PH000 screwdriver, remove the following seven screws circled with red and orange:
- [* red] Four (longer) Phillips 000 screws
- [* orange] Three shorter Phillips 000 screws
+ [* red] Four (longer) PH000 screws
+ [* orange] Three shorter PH000 screws
[* black] Once all of the screws are removed, proceed to using a plastic spudger to pry the metal cover off.
[* black] There are two clips near the bottom, right above the battery, so start by prying on the bottom edge of the plate.