Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Viktoriya Shapaval-

Modifica approvata da Viktoriya Shapaval

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Using a PH000 screwdriver, remove the following seven screws:
+[* black] Using a PH000 screwdriver, remove the following seven screws circled with red and orange:
[* red] Four (longer) Phillips 000 screws
[* orange] Three shorter Phillips 000 screws
[* black] Once all of the screws are removed, proceed to using a plastic spudger to pry the metal cover off.
-[* black] There are two clips near the bottom, right above that battery, so start by prying on the bottom edge of the plate.
+[* black] There are two clips near the bottom, right above the battery, so start by prying on the bottom edge of the plate.