Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #6

Modifica in base a Lisa-

Modifica rifiutata da Jeff Suovanen

Prima di
Dopo il
Invariato

Righe Passo

[* red] Next, reinstall the four 1.2 mm Phillips screws along the inner edge of the trackpad.
[* icon_note] Tighten the screws all the way, then back them out about 1/4 turn.
[* black] Check the alignment of the trackpad on the keyboard side of the upper case. Once you have centered the trackpad in the upper case, tighten the four Phillips screws all the way.
[* black] If you have your new trackpad without a cable, and had disconnected the original one from the trackpad side, now put it back. Open the tiny lever on the new trackpad and slide the cable in, until the dashed line gets all the way in. Close the lever.