Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #6

Modifica in base a Andrew Optimus Goldheart-

Modifica approvata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[* black] The motor power lines have some interesting (read: completely mismatched) color coordination going on—fixers take note.
[* icon_caution] They could also do with some more support, hot glue or ideally some connectorssupport and insulation (hot glue) on the solder joints.
[* icon_caution] They could also do with some more support, hot glue or ideally some connectorssupport and insulation (hot glue) on the solder joints.
[* black] Here's what we found on a quick tour of the main board:
[* red] [http://www.gigadevice.com/product-category/11.html|GD32F103|new_window=true] GigaDevices ARM Cortex-M3
[* orange] Six [http://ebldc.com/?p=147|half-H|new_window=true] bridge motor drivers, made up of two large MOSFETs each
[* yellow] Two pairs of 0.007 ohm resistors by the power inlet (R007).
[* icon_note] Resistors like these, with very low resistance, are used to sense current helping to shut things down if a motor stalls out.