Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Viktoriya Shapaval-

Modifica approvata da Viktoriya Shapaval

Prima di
Dopo il
Invariato

Righe Passo

[* icon_caution] Put on heat-resistant gloves and place the phone on a surface that will not catch fire or melt.
-[* black] Using a heat gun, slowly and evenly heat the edges of the rear panel.
-[* icon_caution] ***Do not linger too long on one spot***. The heat gun can damage the device if left on one section for a long period of time.
-[* black] While heating the rear panel, use a Jimmy to test if the adhesive is soft enough to allow the panel to separate from the device.
-[* black] Carefully detach the rear panel, using opening picks to hold the panel apart from the device.
-[* black] Once most of the edges are separated from the device, attach a suction cup to the panel.
+[* black] Using a heat gun, apply slow and even heat to the edges of the back panel.
+[* icon_caution] DO NOT stay on one spot for too long, the heat gun can damage the phone if the heat is applied to the same area for a long period of time.
+[* black] While heating the back panel, use a Jimmy to test if the adhesive is soft enough to allow the panel to separate from the device.
+[* black] Carefully detach the back panel, using opening picks to hold the panel apart from the device.
+[* black] Once most of the edges are separated from the device, attach a suction cup to the back panel.