Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Natali Monge-

Modifica approvata da Natali Monge

Prima di
Dopo il
Invariato

Righe Passo

[* black] Things are about to heat up. For this step you will need to utilize a heat gun.
[* icon_caution] ***Warning: Make sure to get heat-resistant gloves (oven mitts not recommended) so you don't burn yourself. Take caution to place the phone on a surface that will not catch fire or melt.***
[* black] With your heat gun and gloves on, slowly and evenly heat the edges of the back glass plate.
[* icon_note] As heat is applied, ***do not linger too long on one spot***. The heat gun can damage device if left on one section for a long period of time.
[* black] Apply the heat evenly, testing if the adhesive is soft enough to use the jimmy to separate the back glass panel from the device.
-[* black] As you detach the panel from the device, use the picks to hold the panel apart from the device.
+[* black] As you detach the panel from the device, use the picks to hold the panel apart from the device. The suction cup is attached after the jimmy has separated most of the panel's edges from the device.

Immagine 3

Vecchia Versione

Nuova Versione